*** This product has been discontinued - Available While Supplies Last ***
AMSOIL Synthetic Fifth-Wheel Grease is a heavy-duty lubricant engineered to provide outstanding protection and performance in the heavily-loaded, harsh operating environments specific to fifth-wheel hitches used in trucking and trailer applications.
Package sizes include:
AMSOIL Synthetic Fifth-Wheel Grease is recommended for fifth-wheel and ball hitches used with over-the-road truck, travel/camper, horse, heavy-equipment and hobby trailers. It is also recommended for all open gear applications.
Fifth-wheel hitches must be lubricated in order to minimize wear between the fifth-wheel plate and the trailer, ensure the trailer can pivot behind the pull vehicle (increasing fuel economy and reducing abnormal steering-component and tire wear) and reduce the tendency toward jackknifing. AMSOIL Synthetic Fifth-Wheel Grease is a heavy-duty lubricant engineered to provide outstanding protection and performance in the heavily-loaded, harsh operating environments specific to fifth-wheel hitches used in trucking and trailer applications.
Delivers outstanding protection against wear and corrosion
Provides long service life
Stays in place and resists water washout
Withstands high loads and pressures
Offers convenient, "no mess" squeeze tube with a reusable cap
Provides outstanding all-weather protection and performance
AMSOIL Synthetic Fifth-Wheel Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).
Keep out of the reach of children. Don't pollute. Return used oil to collection centers.
|Application Need||Test to Verify Need||AMSOIL Synthetic Fifth-Wheel Grease Properties|
|Load Bearing||Timken OK Load (ASTM D2509)||75+ lbs.|
|Four-Ball EP (ASTM D2596)||620+ kgf|
|Water Resistance||Water Washout (ASTM D1264)||1%|
|Wear Reduction||Product Makeup||5% Molybdenum content|
|Thickener Type||Calcium-Sulfonate Complex|
|Four-Ball Wear (ASTM D2266)||<0.45 mm|