AMSOIL Shipping Information
Online Store Order FREE Product Catalog Preferred Customer Program Business Accounts Dealership Opportunity
Email Price List

RC Series R&O/AW Gear and Bearing Oils

 RC Series R&O/AW Gear and Bearing Oils
Product Code: RC_SERIES • Brand: AMSOIL

AMSOIL Synthetic RC Series Oils are recommended for gear and bearing applications and circulating systems requiring R&O and/or antiwear additive technology.

Package sizes include:

5-Gallon Pail
55-Gallon Drum
275-Gallon Totes

To order RC Series R&O/AW Gear and Bearing Oils, contact sales@worldsbestoil.ca. or call 1-800-615-3709
MSDS Data Sheet

Product Details

Product Applications

The lighter viscosity RC Series Oils (RCF-RCH) provide superior protection in high- and low-pressure gear, vane and piston hydraulic systems, compressors, high-speed bearings, small gear sets, pumps, high-speed spindles, high-speed gears and many other industrial applications. Higher viscosity RC Series Oils, beginning with RCI (ISO 46), meet AGMA specifications for R&O and Synthetic gear oil specifications 1 through 8, respectively, for the lubrication of intermediate-speed equipment where mild shock loading and intermittent service are involved. These applications include machine tools, roller chains, gear reducers, cone drives, large motor bearings, medium-speed ball and roller bearings, blowers and worm gear sets. Consult the manufacturer for proper viscosity recommendations. The ability of RC Series Oils to extend drain intervals is subject to operating conditions and maintenance practices and should be monitored by oil analysis.

Although AMSOIL lubricants are compatible with mineral oil-based lubricants, for optimum performance it is recommended that the system be thoroughly drained and cleaned, if warranted.

Note: AMSOIL RC Series Oils are not designed for applications requiring Extreme Pressure (EP) agents. For EP fortified lubricants, refer to AMSOIL SG Series Gear Oils or call 1-800-615-3709.

Product Application Specs

The appropriate viscosities of AMSOIL RC Series Oils meet or exceed the following hydraulic oil applications or requirements:

• Denison HF-0, HF-1 and HF-2
• Vickers M-2950-S and I-286-S
• Cincinnati Milacron P-68, P-69 and P-70
• U.S. Steel 127 and 136
• Ford M-6C32
• GM LH-04-1, LH-06-1 and LH-15-1
• Lee Norse 100-1
• Jeffrey No. 87
• BF Goodrich 0152
• Commercial Hydraulics
• AGMA R&O Synthetic Gear Oil specifications

Product Description

AMSOIL Synthetic RC Series R&O/AW Gear and Bearing Oils are formulated with high-quality synthetic base stocks and additive systems that effectively reduce wear and protect equipment by maintaining viscosity, resisting thermal and oxidative breakdown, inhibiting rust and resisting the degrading effects of water.

Viscosity Characteristics

AMSOIL RC Series Oils are very shear-stable and oxidation-resistant, preventing viscosity loss from mechanical shear and viscosity increase from oxidation. RC Series Oils remain fluid at cold temperatures, providing easier startups, quick lubrication circulation and limiting the need for sump heaters. At higher temperatures, RC Series Oils maintain a thick lubricating film, reducing metal-to-metal contact and component wear.

Additive Performance

AMSOIL RC Series Oils are formulated with complete additive technology to enhance performance. Nondetergent, ashless antiwear additives provide an additional layer of protection against wear in severe conditions, rust inhibitors protect critical components against corrosion in the presence of water or process contaminants, antioxidants increase oxidation resistance and extend lubricant life and foam suppressants prevent foaming and air entrapment.

Water Resistant

RC Series Oils provide hydrolytic stability (stability in the presence of water) and demulsibility (ability to separate from water), increasing lubricant life, preventing oil/water emulsions and allowing reservoirs to be drained of water.

Performance Features

• Extended oil drain intervals and equipment life
• Yellow metals compatible
• Resitant to high-temperature oxidation
• Formulated with anti-wear, anti-rust and anti-foam additives
• Excellent cold-temperature performance
• Readily separate from water

AMSOIL PRODUCT WARRANTY

AMSOIL industrial lubricants are formulated to meet or exceed accepted industry specifications. AMSOIL warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL products are used in full compliance with the company's recommendations. However, the purchaser of these lubricants is responsible for determining if these specifications are adequate and proper for the intended application. The AMSOIL warranty is limited to lubricant performance consistent with indicated specifications. No additional warranty, expressed or implied, can be made.

AMSOIL PRODUCT AVAILABILITY

AMSOIL products are available in 5-gallon pails, 55- gallon drums, 275-gallon totes and bulk quantities. For 275- gallon totes, please allow two to four weeks for delivery. AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on customer requests and regional demands.

HEALTH & SAFETY

This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).

Click here to view the MSDS Data Sheet for AMSOIL RC_SERIES.

Keep out of the reach of children. Don't pollute. Return used oil to collection centers.

Close Product Detail
Technical Data
TYPICAL TECHNICAL PROPERTIES
Synthetic RC SERIES Circulating Oils RCE
ISO 10
RCF
ISO 15
RCG
ISO 22
RCH
ISO 32
RCI
ISO 46
ISO VG - ASTM D-2422 ISO 10 ISO 15 ISO 22 ISO 32 ISO 46
R&O Gear Oil Classification - - - 0 1
AGMA Synthetic Gear Oil Classification - - - 0S 1S
VK 100°C ASTM D-445 2.9 3.6 4.7 6.2 7.6
VK 40°C ASTM D-445 10.7 15.1 22.1 33.1 43.7
Viscosity Index ASTM D-2270 115 123 130 137 142
Flash Point, °C (°F) ASTM D-92 187 (369) 209 (408) 237 (459) 264 (507) 257 (495)
Fire Point, °C (°F) ASTM D-92 197 (387) 227 (441) 265 (509) 278 (532) 272 (522)
Pour Point, °C (°F) ASTM D-97 -68 (-90) -68 (-90) -68 (-90) -53 (-63) -50 (-58)
NOACK ASTM D-5800 NA 18.4% 7.4% 3.8% 4.2%
4-Ball Wear Test, ASTM D-4172
(40Kg, 1200 rpm, 75°C, 60 min.)
0.60 0.50 0.50 0.45 0.45
Copper Strip Corrosion Test ASTM D-130 121°C (250°F), 3 hrs. 1A 1A 1A 1A 1A
Rust Tests ASTM D-665A&B
(freshwater & synthetic seawater)
NA Pass Pass Pass Pass
Foam, ml, (ASTM D-892)
Sequence I, II, III Test End
and after 10 minutes settling
0/0/0 0/0/0 0/0/0 0/0/0 0/0/0
TYPICAL TECHNICAL PROPERTIES
Synthetic RC SERIES Circulating Oils RCJ
ISO 68
RCK
ISO 100
RCL
ISO 150
RCM
ISO 220
RCN
ISO 320
ISO VG - ASTM D-2422 ISO 68 ISO 100 ISO 150 ISO 220 ISO 320
R&O Gear Oil Classification 2 3 4 5 6
AGMA Synthetic Gear Oil Classification 2S 3S 4S 5S 6S
VK 100°C ASTM D-445 10.3 13.6 19.4 25.8 32.9
VK 40°C ASTM D-445 67.8 100.5 155.8 232.2 334.2
Viscosity Index ASTM D-2270 138 136 142 142 139
Flash Point, °C (°F) ASTM D-92 258 (496) 264 (507) 286 (547) 281 (538) 282 (540)
Fire Point, °C (°F) ASTM D-92 274 (525) 276 (529) 302 (576) 303 (577) 308 (586)
Pour Point, °C (°F) ASTM D-97 -48 (-54) -45 (-49) -41 (-42) -39 (-38) -35 (-31)
NOACK ASTM D-5800 3% 2.8% 2.7% 2.1% 1.8%
4-Ball Wear Test, ASTM D-4172
(40Kg, 1200 rpm, 75°C, 60 min.)
0.45 0.45 0.35 0.35 0.35
Copper Strip Corrosion Test ASTM D-130 121°C (250°F), 3 hrs. 1A 1A 1A 1A 1A
Rust Tests ASTM D-665A&B
(freshwater & synthetic seawater)
Pass Pass Pass Pass Pass
Foam, ml, (ASTM D-892)
Sequence I, II, III Test End
and after 10 minutes settling
0/0/0 0/0/0 0/0/0 0/0/0 0/0/0
TYPICAL TECHNICAL PROPERTIES
Synthetic RC SERIES Circulating Oils RCO
ISO 460
RCP
ISO 680
RCQ
ISO 1000
XXX
ISO 000
XXX
ISO 000
ISO VG - ASTM D-2422 ISO 460 ISO 680 ISO 1000 ISO 000 ISO 000
R&O Gear Oil Classification 7 8 - 0 0
AGMA Synthetic Gear Oil Classification 7S - - 0S 0S
VK 100°C ASTM D-445 42.8 54.9 72.8 00.0 00.0
VK 40°C ASTM D-445 484.6 691.8 1045.7 000.0 000.0
Viscosity Index ASTM D-2270 139 139 139 000 000
Flash Point, °C (°F) ASTM D-92 282 (540) 282 (540) 282 (540) 000 (000) 000 (000)
Fire Point, °C (°F) ASTM D-92 304 (579) 302 (576) 304 (579) 000 (000) 000 (000)
Pour Point, °C (°F) ASTM D-97 -32 (-26) -31 (-24) -28 (-18) 00 (00) 00 (00)
NOACK ASTM D-5800 1.7% 1.7% 1.7% 0.0% 0.0%
4-Ball Wear Test, ASTM D-4172
(40Kg, 1200 rpm, 75°C, 60 min.)
0.35 0.33 0.33 0.00 0.00
Copper Strip Corrosion Test ASTM D-130 121°C (250°F), 3 hrs. 1A 1A 1A NA NA
Rust Tests ASTM D-665A&B
(freshwater & synthetic seawater)
Pass Pass Pass XXXX XXXX
Foam, ml, (ASTM D-892)
Sequence I, II, III Test End
and after 10 minutes settling
0/0/0 0/0/0 0/0/0 0/0/0 0/0/0
Close Technical Data

 RC Series R&O/AW Gear and Bearing Oils

Did this product meet your expectations?

(click on a star to rate)

Product Name: RC Series R&O/AW Gear and Bearing Oils
Current Rating: 4.5 out of 5 stars
Votes & Reviews: 1 vote(s) and 0 user reviews.



Share your AMSOIL Experience
by writing a review


smaller | bigger

Rating & Review Section


Was this page helpful?

(click on a star to rate)

Blog Title: AMSOIL RC Series R&O/AW Gear and Bearing Oils
Current Rating: 4.5 out of 5 stars
Votes & Reviews: 1 vote(s) and 0 user reviews.


Post your comments
or ask a question


smaller | bigger

1-800-615-3709

Price List Request

Receive wholesale price list in your email.